​BO-GENG LI

BO-GENG LI
The State Key Laboratory of Chemical Engineering (Zhejiang University)
Department of Chemical and Biological Engineering,
Zhejiang University, Hangzhou 310027, P.R.CHINA
Tel: +86(571)8795 2098(O), 8795 2623(L); Fax: +86(571)8795 2122
E-Mail: bgli@zju.edu.cn


EDUCATION
Ph.D., Chemical Engineering, Zhejiang University, Nov. 1987
M.Eng., Chemical Engineering, Zhejiang University, Nov. 1984
B.Eng., Polymer Chemical Engineering, Zhejiang University, Feb.1982
 
EMPLOYMENT HISTORY
Qiushi Scholar Chair Professor of Chemical Engineering, Zhejiang University (2007 – )
Chang Jiang Scholar Chair Professor of Chemical Engineering, Zhejiang University (2001 – 2006)
Professor, Department of Polymer Science and Engineering, Zhejiang University (Dec.1994 – Aug.1997); Department of Chemical and Biochemical Engineering, Zhejiang University (Sept.1997 – )
Associate Professor, Department of Polymer Science and Engineering, Zhejiang University, (April 1992 – Nov.1994)
Associate Professor, Department of Chemical Engineering, Zhejiang University, (Aug.1990 – Feb.1991)
Lecturer, Department of Chemical Engineering, Zhejiang University (Dec.1987 – July 1990)
 
OTHER POSITIONS HELD
Dean, Faculty of Engineering, Zhejiang University (Dec. 2008 –)
Executive Dean, School of Materials Science and Chemical Engineering, Zhejiang University (Sept.1999 – Dec. 2008 )
Chair, Department of Chemical and Biological Engineering, Zhejiang University (Sept. 1997 – Dec.2000)
Director, Institute of Polymer Science and Engineering, Zhejiang University (Oct.1992 – Feb.2000); Institute of Chemical Engineering (Feb.2000 – 2003)
Associate Chair, Department of Polymer Science and Engineering, Zhejiang University, (Oct.1996 – Aug.1997)
Deputy Director(Oct.1989 – Dec.2000), Director(Dec.2000 –), Polymer Reaction Engineering Laboratory, State Key Laboratory of Chemical Engineering
Visiting Scientist, Department of Chemical Engineering, Massachusetts Institute of Technology (MIT), USA (Jan. – March, 1998)
Visiting Fellow, Department of Chemical Engineering, Loughborough University, U.K. (March 1991 – March 1992)
 
PROFESSIONAL ACTIVITIES
Membership
Member, Review Panel of Chemical Engineering and Technology, The Academic Degrees Committee of the State Council of PR China (2003 – )
Member, Review Panel of Chemical Engineering and Technology, China’s Awards for Science and Technology (1997, 2000, 2004, 2005, 2006, 2007)
Member, Review Panel of Chemical Engineering and Applied Chemistry, The National Natural Science Foundation of China (NSFC) (2000 – 2004)
Member, National Teaching Steering Committee for Chemical Engineering Education (2002 – )
Standing Member, Chemical Industry and Engineering Society of China (CIESC) (2007 – )
Associate Director, Chemical Engineering Committee of CIESC (2002 – )
Chairman, Chemical Industry and Engineering Society of Zhejiang Province (2006 – )
Director, Teaching Steering Committee for Chemistry and Chemical Engineering Education of Zhejiang Province (2006 – )
Organization and Service for International Conferences
Chairman, Hangzhou International Polymer Forum (HIPF2011), May22-25, 2011 Hangzhou/China
Chairman, Asian Polyolefin Workshop 2007 (APO2007), Oct.31-Nov.3, 2007, Hangzhou/China
Chairman, Hangzhou International Polymer Forum (HIPF2007), May13-17, 2007 Hangzhou/China
Co-Chairman, 2nd Asian Symposium on Emulsion polymerization and Functional Polymeric Microspheres, Sept.9-11, 2007, Beijing/China
Co-Chairman, Asia Polymer Symposium (APOSYM/2004), October 10-14, 2004, Hangzhou/China
Secretary General, China/USA/Japan Joint Chemical Engineering Conference, October 11-13, 2005, Beijing/China
Secretary General, 1st Asia Symposium on Emulsion Polymerization and Functional Polymeric Microspheres, Oct. 7-11, 1995, Hangzhou/China
Member, Scientific Committee of 10th International Workshop on Polymer Reaction Engineering, Oct. 10-13, 2010, Hamburg/Germany
Member, International Organizing Committee, 3rd Asian Polyolefin Workshop (APO2009), Oct.27-30, 2009, Seoul/Korea
Member, Scientific Committee of 9th International Workshop on Polymer Reaction Engineering, Oct. 7-10, 2007, Hamburg/Germany
Member, International Organizing Committee, 1st Asian Polyolefin Workshop (APO2005), Dec.7-9, 2005, Nara/Japan
Member, Scientific Committee of 8th International Workshop on Polymer Reaction Engineering, Oct. 3-6, 2004, Hamburg/Germany
Member, Scientific Committee of 7th International Workshop on Polymer Reaction Engineering, Oct. 8-10, 2001, Hamburg/Germany
Service for Journals
Associate Editor, Industrial & Engineering Chemistry Research (American Chemical Society Publications)
Editorial Member, Macromolecular Reaction Engineering (WILEY Publications)
Editorial Member, Chinese Journal of Chemical Engineering (in English)
Editorial Member, Frontiers of Chemical Engineering in China (in English)
Editorial Member, Acta Petrolei Sinica (Petroleum Processing Section) (in Chinese)
Editorial Member, The Chinese Journal of Process Engineering (in Chinese)
Editorial Member, Sciencepaper Online, Chemistry/Chemical Engineering (in Chinese)
Editorial Member, Chemical Industry and Engineering Progress (in Chinese)
Editorial Member, Modern Chemical Industry (in Chinese)
Editorial Member, Chemical reaction Engineering and Technology (in Chinese)
 
ACADEMIC AWARDS AND HONORS
Zhejiang Provincial Medal for Distinguished Teacher, 2010
1st Prize for Natural Science Research, Ministry of Education of PRC, 2009
Baosteel Excellent Teacher Award, 2008
2nd Prize for R&D, Zhejiang Province: 2006, 2004, 2001, 1997
National Excellent Course in Polymer Chemistry, 2005
3rd Prize for R&D, Zhejiang Province, 2005
3rd Prize for R&D, Shanghai City, 2003
3rd Prize for R&D, SINOPEC, 2003
National Science Fund of China for Distinguished Young Scholars, 2001
Honorary Outstanding Young Expert of Zhejiang Province, 1996
21st Century Fellowship for Talents, State Education Commission of PRC, 1994
Young Scientist Award of Zhejiang Province, 1994
 
PRESENT AREAS OF TEACHING AND RESEARCHES
Teaching
Introduction to chemical engineering (for undergraduate students)
Polymer chemistry (for undergraduate students)
Polymer reaction engineering (for graduated students)
Chemical engineering progress (for Ph D students)
Researches
l          Polymer reaction engineering
l          Polymer product engineering
l          Environmentally benign process for polymerization (bulk polymerization and polycondensation, gas phase polymerization, (mini)emulsion polymerization)
l          Polymers for environment protection and ecological polymer materials (biodegradable polymer, renewable resource-based polymers)
 
RECENT RESEARCH SUPPORTS
Ministry of Science and Technology – 973 Program: Fundamental Researches for Preparation and Processing of Thermal Plastic Elastomer, Sept.,2010 - Sept.,2015, CNY 27,800,000 Chief Scientist
Ministry of Science and Technology – 973 Program: Preparation of Polyolefin Alloy and Composites by In-situ Polymerization, Oct.,2005 - Sept.,2010, CNY 4,000,000 PI
NSFC - Key Project: Heterogeneous Living Polymerization, Jan.,2010 - Dec.,2013, CNY 1,600,000 PI
NSFC - General Project: RAFT Radical Polymerization in Taylor Reactor, Jan.,2009 - Dec.,2011, CNY360,000 PI
BASF: Kinetic Modeling of Graft Polymerization, Sept.,2008 - Dec.,2010, EUR 70,000 PI
SINOPEC: Biodegradable Copolyesters, July,2007 - June,2009, CNY 500,000 PI
Hengyi Group: R&D of Polymerization Process for Polyacrylonitrile for Carbon Fiber, July,2007 – Dec.,2009, CNY 1,700,000 PI
 
AUTHORIZED PATENTS
33. Wenjun Wang, Dunming Wang, Bo-Geng Li, Shiping Zhu, “A Method for Preparation of Hyperbranched Vinylamide or Acrylamide Polymers”, ZL 2009 1 0153397.7
32. Hong Fan, Jun Tan, Bo-Geng Li, “A Method for Preparation of Methylphenylchlorosilanes”, ZL 2007 1 0164719.9
31. Jun Tan, Hong Fan, Bo-Geng, Weiguo Ma, “A Method for Preparation of Trichloro-Acetic Chloride by Using By-Products in Production of Organoacetoxysilan”, ZL 2007 1 0164718.4
30. Bo-Geng Li, Zhengmin Zhang, Linbo Wu, Shiping Zhu, “A Renewable Solid Desulphuring Agent”, ZL 2007 1 0071276.9
29. Linbo Wu, Dan Cao, Bo-Geng Li, Yuan Huang, “A Method for Preparation of Polylactic acid/SiO2 Nano-composite”, ZL 2007 1 0067149.1
28. Hong Fan, Bo-Geng Li, Jun Tan, Zhipeng Zheng, Wanzhang Liu, “A Method for Modification of UV curable Adhesive with SiO2 Nano-particles”, ZL 2006 1 0052461.9
27. Linbo Wu, Yan Zhang, Bo-Geng Li, A New Biodegradable Polyester,  ZL 2006 1 0051698.5
26. Linbo Wu, Bo-Geng Li, Dong An, Shiping Zhu, “Preparation and Application of Ionic Polymer Containing 1,1,3,3-tetramethylguanidine cation”, ZL 2006 1 0050829.8
25. Linbo Wu, Bo-Geng Li, Dong An, Shiping Zhu, “Preparation and Application of Crosslinked Ionic Polymer Containing 1,1,3,3-tetramethylguanidine cation”, ZL 2006 1 0050828.3
24. Hong Fan, Bo-Geng Li, Jun Tan, Zhipeng Zheng, Zhiyang Bu, Wanzhang Liu, “A Method for Prepariation of Silane Coupling Agent with Long Chain Segment of Polyether”, ZL 2006 1 0049525.X
23. Linbo Wu, Weichao Wang, Yuan Huang, Bo-Geng Li, “A Polycondensation Method for Hydroxyl Acid Polymer”, ZL 2005 1 0060705.3
22. Bo-Geng Li, Linbo Wu, Ping Zhang, “A New Co-polyarylate”, ZL 2005 1 0060698.7
21. Bo-Geng Li, Bo Yu, “Preparation of Syndiotactic Polystyrene with γ Crystal Form”, ZL 2005 1 0050680.9
20. Bo-Geng Li, Bo Yu, “Preparation of Syndiotactic Polystyrene with β Crystal Form”, ZL 2005 1 0050679.6
19. Linbo Wu, Bo-Geng Li, Haiying Zhang, “Preparation of Aliphatic Polyester”, ZL 2005 1 0050265.3.
18. Bo-Geng Li, Hong Fan, Jijiang Hu, Zhiyang Bu, Junwei Zhang, A Online Monitor for Olefine Gas Phase Polymerization”, ZL 2005 1 0049060.3
17. Hong Fan, Jun Tan, Bo-Geng Li, Zhiyang Bu, “Synthesis of Bimethylchlorosilanes”, ZL 2005 1 0049014.3
16. Bo-Geng Li, Kun Cao, et al., “Reactor for Manufacturing Syndiotactic Polystyrene”, ZL 2004 2 0021937.9
15. Hong Fan, Yuegang Shao, Jun Tan, Bo-Geng Li, et al., “Synthesis of Methylchlorosilanes”, ZL 2004 1 0084423.2
14. Hong Fan, Yuegang Shao, Jun Tan, Bo-Geng Li, et al., “A Combinative Method for Synthesis of Methylchlorosilanes”, ZL 2004 1 0084421.3
13. Hong Fan, Yuegang Shao, Jun Tan, Bo-Geng Li, et al., “A Combinative Method for Disproportionation of CH3SiCl3”, ZL 2004 1 0084348.X
12. Yingwu Luo, Lei Yang, Baofang Li, Bo-Geng Li, “Preparation of Polystyrene with High MW and Narrow MWD”, ZL 2004 1 0066751.X
11. Bo-Geng Li, Yanwu Zhang,Hong Fan, Jijiang Hu, and Zhiyang Bu, “Preparation of Nano-composite of Polypropylene/Clay Using a Complex-supported Catalyst”, ZL 2004 1 0015748.5
10. Bo-Geng Li, Kun Cao, Zhigang Shen, Bo Yu, Wenle Zhou, Rong Fan, Weiwei Zhao, “Preparation of Syndiotactic Polystyrene”, ZL 2004 1 0017717.3
9. Bo-Geng Li, Yanwu Zhang,Hong Fan, Jijiang Hu, and Zhiyang Bu, “Preparation of Complex-supported Catalyst with Clay for Olefin Polymerization”, ZL 2004 1 0015747.0
8. Yingwu Luo, Baofang Li, Xiangdong Liu, and Bo-Geng Li, “Latex of Capsule Containing Organo-Phase Transition Materials and Its Preparation”, ZL 2004 1 00117942
7. Zhigang Shen, Bo-Geng Li, Wenle Zhou, Bo Yu, Weiwei Zhao, “Preparation of Syndiotactic Polystyrene”, ZL 03 1 50729.8
6. Kun Cao and Bo-Geng Li, “A Semi-continuous Process for Preparation of Syndiotactic Polystyrene”, ZL 03 1 41871.6
5. Kun Cao and Bo-Geng Li, “A Batch Process for Preparation of Syndiotactic Polystyrene”, ZL 03 1 41870.8
4. Hong Fan, Yue-Gang Shao, Bo-Geng Li, et al., “Preparation of Methylchlorosilanes”, ZL 01 1 21551.8
3. Zhi-Gang Shen, Meng Ye, Bo-Geng Li, et al., “A Method for Purification of Styrene”, ZL 98 1 22009.6
2. Bo-Geng Li, Wen-Jun Wang, et al., “Reactor for Bulk Polymerization”, ZL 98 1 10857.1
1. Bo-Geng Li, Xue-Qiu Xie., et al., “Preparation of Vinylidene Chloride Copolymer Latex”, ZL 97 1 10436.0
 
PUBLICATIONS
Book Chapters
6. Bo-Geng Li*, Yingwu Luo, Hong Fan, Linbo Wu, Shiping Zhu, “Chemical engineering research for advanced polymer materials” in Advances in Materials-Oriented Chemical Engineering (in Chinese), Chem. Ind. Press, Beijing, 2007, 68-86
5. Bo-Geng Li*, Yan-Wu Zhang, Hong Fan, Jijiang Hu, Guo-Hua Hu, “Preparation of PP Nano-composites by in-situ Polymerization: Dispersion of Nanometer Fillers in PP”, in Current Achievement Hetrogeneous Olefin Polymerization Catalysts, Ed. by M. Terano, Sankeisha Co., Ltd, Nagoya, 2004, 71-76
4. Bo-Geng Li, “Polymer reaction engineering”, in Prospect of Chemical Engineering in 21 Century (in Chinese), Chem. Ind. Press, Beijing, 2004, 138-144
3. Bo-Geng Li*, Rong Fan, and Kun Cao, “Synthesis of powdery syndiotactic polystyrene with homogeneous metallocene catalysts: kinetics and morphologies”, in Advances on Organometallic Catalysts and Olefin Polymerization in China and Germany”, Ed. by J.Sun and C. Janiak, Chem. Ind. Press, Beijing, 2001, 200-206
2. Bo-Geng Li*, Hui-Gen Yuan, and Zu-Ren Pan, “Monomer reactivity ratios of AN with MA in continuous aqueous copolymerization at high conversion”, in Polymer Reaction Engineering, Ed. By K.-H.Reichert, VCH Verlagsgesellschaft, Weinheim, 1989, 222-229
1. Zai-Zhang Yu* and Bo-Geng Li, “Kinetics of MMA bulk polymerization at high conversion”, in Polymer Reaction Engineering, Ed. By K.-H.Reichert and W. Geiseler, VCH Verlagsgesellschaft, Weinheim, 1986, 201-204
Journal Papers
274. Jintao Wan, Cheng Li, Zhi-Yang Bu, Cun-Jin Xu, Bo-Geng Li*, Hong Fan*, “A comparative study of epoxy resin cured with a linear diamine and a branched polyamine”, Chem. Eng. J., 2012, accepted, 10.1016/j.cej.2012.01.134
273. Dunming Wang, X H Li, Wenjun Wang, X Gong, Bo-Geng Li, Shiping Zhu, “Kinetics and modeling of semi-batch RAFT copolymerization with hyperbranching“, Macromolecules, 2012, 45: 28–38
272. Jintao Wan, Songsong Wang, Cheng Li, Dapeng Zhou, Jianguo Chen, Zheng Liu, Liqiong Yu, Hong Fan*, Bo-Geng Li*, “Effect of molecular weight and molecular weight distribution on cure reaction of novolac with hexamethylenetetramine and properties of related composites“, Thermochimica Acta, 2012, 530: 32-41
271. Jintao Wan, Zhiyang Bu, Cun-Jin Xu, Bo-Geng Li*, Hong Fan*, “ Preparation, curing kinetics, and properties of a novel low-volatile starlike aliphatic-polyamine curing agent for epoxy resins”, Chem. Eng. J., 2011, 171 (1): 357-367
270. Qi Zhang, Wen-Jun Wang*, Yangyang Lu, Bo-Geng Li, Shiping Zhu*, “ Reversibly coagulatable and redispersible polystyrene latex prepared by emulsion polymerization of styrene containing switchable amidine“, Macromolecules, 2011, 44 (16): 6539-6545
269. Pingwei Liu*, Eric Landry, Zhibin Ye*, Helen Joly, Wen-Jun Wang*, Bo-Geng Li, “ ’Arm-First’ synthesis of core-cross-linked multiarm star polyethylenes by coupling palladium-catalyzed ethylene "living" polymerization with atom-transfer radical polymerization“, Macromolecules, 2011, 44 (11): 4125-4139
268. Gongwei Pu, Yingwu Luo*, Anni Wang, Bo-Geng Li, “Tuning polymer blends to cocontinuous morphology by asymmetricdiblock copolymers as the surfactants”, Macromolecules, 2011, 44 (8): 2934–2943
267. Yingwu Luo*, Xiaoguang Wang, Bo-Geng Li*, Shiping Zhu*, “Toward well-controlled ab initio RAFT emulsion polymerization of styrene mediated by 2-(((dodecylsulfanyl)carbonothioyl)sulfanyl)propanoic acid“, Macromolecules, 2011, 44 (2): 221-229
266. Ying Zhao, Ying-Wu Luo*, Bo-Geng Li, Shiping Zhu*, “pH responsivity and micelle formation of gradient copolymers of methacrylic acid and methyl methacrylate in aqueous solution“, Langmuir, 2011, 27 (18): 11306-11315
265. Suyun Jie*, Pengfei Ai, and Bo-Geng Li, “Highly active and stereospecific polymerization of 1,3-butadiene catalyzed by dinuclear cobalt(II) complexes bearing 3-aryliminomethyl-2-hydroxyben-zaldehydes“, Dalton Trans., 2011, 40: 10975-10982
264. Xiaohui Li, Wen-Jun Wang*, Bo-Geng Li*, Shiping Zhu, “ Kinetics and modeling of solution ARGET ATRP of styrene, butyl acrylate, and methyl methacrylate“, Macromol. React. Eng., 2011, 5 (9-10): 467-478
263. SuYun Jie*, Pengfei Ai, Qimeng Zhou, Bo-Geng Li, “ Nickel and cationic palladium complexes bearing (imino) pyridyl alcohol ligands: Synthesis, characterization and vinyl polymerization of norbornene“, J. Organomet. Chem., 2011, 696 (7): 1465-1473
262. Cun-Jin Xu, Bo-Geng Li*, Jintao Wan, Zhiyang Bu, “Design, synthesis and characterization of a highly luminescent Eu-complex monomer featuring thenoyltrifluoroacetone and 5-acryloxyethoxymethyl-8-hydroxyquinoline”, Journal of Luminescence, 2011, 131 (8): 1566-1570
261. Cun-Jin Xu, Bo-Geng Li*, Jin-Tao Wan, Zhi-Yang Bu, “ Synthesis and Characterization of a Eu-containing Polymer Precursor Featuring Thenoyltrifluoroacetone and 5-acrylamido-1,10-phenanthroline“, Spectrochimica Acta Part A, 2011, 82: 159-163
260. Jintao Wan, Hong Fan*, Bo-Geng Li*, Cun-Jin Xu, Zhiyang Bu, “Synthesis and nonisothermal reaction of a novel acrylonitrile-capped poly(propyleneimine) dendrimer with epoxy resin”, J Therm Anal Calorim, 2011, 103 (2): 685–692
259. Jintao Wan, Zhiyang Bu, Cheng Li, Hong Fan*, Bo-Geng Li*, “ Model-fitting and Model-free Nonisothermal Curing Kinetics of Epoxy Resin with a Low-volatile Five-armed Starlike Aliphatic Polyamine“, Thermochimica Acta, 2011, 525 (1-2): 31-39
258. Jintao Wan, Zhi-Yang Bu, Cheng Li, Hong Fan*, Bo-Geng Li*, “ Preparation, melting, glass relaxation and nonisothermal crystallization kinetics of a novel dendritic nylon-11“, Thermochimica Acta, 2011, 524 (1-2): 117-127
257. Jintao Wan, Zhiyang Bu, Cunjin Xu, Bo-Geng Li*, Hong Fan*, “Learning about novel amine-adduct curing agents for epoxy resins: butyl-glycidylether-modified poly(propyleneimine) dendrimers”, Thermochimica Acta, 2011, 519 (1-2): 72-82
256. Shaojie Liu, Zhen Yao*, Lin Chen, Bin-Bin Dai, Kun Cao*, Bo-Geng Li, Shiping Zhu, “Influence of chain microstructure on ethylene–norbornene copolymer film properties”, J. Appl. Polym. Sci., 2011, 121 (2): 707-710
255. Bin Liu, Qian Li, Mingxin Yu, Jiaojiao Liang, Hong Fan, and Bo-Geng Li, “ Synthesis of novel phenoxyimine ligands containing a 2,6-difluoro-4-styrylaniline“, J. Chem. Res., 2011, 35 (3): 151-153
254. Cheng Gong, Li Li, Linbo Wu, Bo-Geng Li*, “Study on the viscosity of polymer polyol“, Petrochemical Technology (China), 2011, 40(11): 1190-1195
253. Fujun Lu, Yingwu Luo* and Bo-Geng Li, “pH Effects on the Synthesis of Nanocapsules via Interfacial Miniemulsion Polymerization Mediated by Amphiphilic RAFT Agent with the R Group of Poly(methyl acrylic acid-ran-styrene)”, Ind. Eng. Chem. Res., 2010, 49(5): 2206-2212
252. Yingwu Luo*, Xiaoguang Wang, Yue Zhu, Bo-Geng Li*, and Shiping Zhu*, “Polystyrene-block-poly(n-butyl acrylate)-block-polystyrene Triblock Copolymer Thermoplastic Elastomer Synthesized via RAFT Emulsion Polymerization”, Macromolecules, 2010, 43 (18): 7472-7481
251. Wen-Jun Wang*, Dunming Wang, Bo-Geng Li and Shiping Zhu*, “Synthesis and Characterization of Hyperbranched Polyacrylamide Using Semibatch Reversible Addition−Fragmentation Chain Transfer (RAFT) Polymerization”, Macromolecules, 2010, 43 (9): 4062-4069
250. Fujun Lu, Yingwu Luo, Bo-Ggeng Li, Qian Zhao and F. Joseph Schork*, “Synthesis of Thermo-Sensitive Nanocapsules via Inverse Miniemulsion Polymerization Using a PEO−RAFT Agent”, Macromolecules, 2010, 43 (1): 568-571
249. Cun-Jin Xu, Bo-Geng Li*, “Synthesis and Characterization of Highly Luminescent Copolymers of Methyl Methacrylate and Eu-Complexed 5-Acryloxyethoxymethyl-8-hydroxyquinoline”, Macromol. Chem. & Phys., 2010, 211(16): 1733-1740
248. Lixia Hu, Linbo Wu*, Fangchao Song and Bo-Geng Li*, “Kinetics and Modeling of Melt Polycondensation for Synthesis of Poly[(butylene succinate)-co-(butylene terephthalate)], 1 – Esterification”, Macromol. Reac. Eng., 2010, 4(9-10): 621-632
247. Wen-Jun Wang*, Pingwei Liu, Bo-Geng Li and Shiping Zhu*, “One-step synthesis of hyperbranched polyethylene macroinitiator and its block copolymers with methyl methacrylate or styrene via ATRP”, J. Polym. Sci., Part A: Polym. Chem., 2010, 48(14): 3024-3032
246. Jie Dong, Linbo Wu*, Dong An, Bo-Geng Li and Shiping Zhu, “Stability study of inverse suspension copolymerization of 1,1,3,3-tetramethylguandium acrylate and N,N′-methylenebisacrylamide”, J. Appl. Polym. Sci., 2010, 118(3)1450-1454
245. Ying Zhao, Linbo Wu, Bo-Geng Li*, Shiping Zhu*, “The effect of ligand molecular weight on copper salt catalyzed oxidative coupling polymerization of 2,6-dimethylphenol”, J. Appl. Polym. Sci., 2010, 117(6): 3473-3481
244. Yan Zhang, Linbo Wu*, Bo-Geng Li, “Synthesis and characterization of biodegradable crosslinked polymers from 5-hydroxylevulinic acid and α,ω-diols”, J. Appl. Polym. Sci., 2010, 117(6): 3315-3321
243. He-Yang Liu, Zhen Yao*, Kun Cao*, Bo-Geng Li’ “Kinetic analysis of the imidization of poly(styrene-co-maleic anhydride) with aniline in the melt”, J. Appl. Polym. Sci., 2010, 116(5): 2951-2957
242. Jintao Wan, Bo-Geng Li*, Hong Fan*, Zhi-Yang Bu, Cun-Jin Xu, “Nonisothermal reaction, thermal stability and dynamic mechanical properties of epoxy system with novel nonlinear multifunctional polyamine hardener”, Thermochimica Acta, 2010, 511 (1-2): 51-58
241. Jintao Wan, Bo-Geng Li*, Hong Fan*, Zhi-Yang Bu, Cun-Jin Xu, “Nonisothermal reaction kinetics of DGEBA with four-armed starlike polyamine with benzene core (MXBDP) as novel curing agent”, Thermochimica Acta, 2010, 510(1-2): 46-52
240. Xiaoguang Wang, Yingwu Luo*, Bo-Geng Li*, Shiping Zhu*, “Ab Initio Batch Emulsion RAFT Polymerization of Styrene Mediated by Poly(acrylic acid-b-styrene) Trithiocarbonate”, Macromolecules, 2009, 42 (17): 6414-6421
239. Rui Wang, Weihua Li, Yingwu Luo, Bo-Geng Li*, An-Chang Shi*, Shiping Zhu*, “Phase Behavior of Ternary Homopolymer/Gradient Copolymer Blends”, Macromolecules, 2009, 42 (6): 2275–2285
238. Rui Wang, Yingwu Luo*, Bo-Geng Li*, Shiping Zhu*, “Modeling of Branching and Gelation in RAFT Copolymerization of Vinyl/Divinyl Systems”, Macromolecules, 2009, 42 (1):  85-94
237. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Influence of clay and predispersion method on the structure and properties of polystyrene (PS)-clay nanocomposites”, Polym. Eng. &  Sci., 2009, 49(10): 1937-1944
236. Ping Zhang, Linbo Wu*, Bo-Geng LI, “Thermal stability of aromatic polyesters prepared from diphenolic acid and its esters”, Polymer Degradation and Stability, 2009, 94(8): 1261-1266
235. Lei Yang, Yingwu Luo*, Xinzhi Liu, Bo-Geng Li, “RAFT miniemulsion polymerization of methyl methacrylate”, Polymer, 2009, 50(18): 4334-4342
234. Jing Gao, Yingwu Luo*, Rui Wang, Xiaojuan Zhang, Bo-Geng Li*, Shiping Zhu*, “Effect of monomer composition on apparent chain transfer coefficient in reversible addition fragmentation transfer (RAFT) copolymerization”, Polymer, 2009, 50(3): 802-809
233. Shaojie Liu, Zhen Yao*, Kun Cao*, Bo-Geng Li, Shiping Zhu, “Preparation of polar ethylene–norbornene copolymers by metallocene terpolymerization with triisobutylaluminium-protected but-3-en-1-ol”, Macromol. Rapid Commun., 2009, 30(7): 548-557
232. Gongwei Pu, Yingwu Luo*, Qianchuan Lou, Bo-Geng Li, “Co-continuous polymeric nanostructures via simple melt mixing of PS/PMMA”, Macromol. Rapid Commun., 2009, 30(2):133-137
231. Lie Lu, Hong Fan*, Bo-Geng Li, Shiping Zhu*, “Polypropylene and ethylene-propylene copolymer reactor alloys prepared by metallocene/Ziegler-Natta hybrid catalyst”, Ind. Eng. Chem. Res., 2009, 48(18): 8349-8355
230. Zhengmin Zhang, Linbo Wu*, Jie Dong, Bo-Geng Li*, Shiping Zhu*, “Preparation and SO2 sorption/desorption behavior of an ionic liquid supported on porous silica particles”, Ind. Eng. Chem. Res., 2009, 48(4): 2142-2148
229. Shaojie Liu, Kun Cao*, Zhen Yao, Bo-Geng Li, Shiping Zhu*, “Model development for semicontinuous production of ethylene and norbornene copolymers having uniform composition”, AIChE J, 2009, 55(3): 663-674
228. Liangchao Li, Jiajun Wang, Xueping Gu*, Lianfang Feng, Bo-Geng Li, “Study on local gas-liquid dispersion in dual-impeller aerated stirred vessel”, J. Zhejiang Univ. (Eng. Sci.), 2009, 43(3): 463-467
227. Chen Li, Hong Fan*, Lie Lu, Chunwen Guo, Bo-Geng Li, “Research on toughening modification of copolymerized polypropylene using polyolefin elastomers”, J. Chem. Eng. of Chinese Univ., 2009, 23(5), 813-818
226. Yougui Zheng, Xiaoxiang Zhu, Linbo Wu, Bo-Geng Li*, “Kinetic study of vinyl acetate graft polymerization on PEG”, J. Chem. Eng. of Chin. Univ., 2009, 23(4): 605-610
225. Chunwen Guo, Hong Fan*, Wenjun Wang, Bo-Geng Li, “Ethylene polymerizations catalyzed by α-diimine complexes with different substituents on ligand backbone”, Acta Polymerica Sinica, 2009, (8): 823-827
224. Junwei Zhang, Hong Fan*, Bo-Geng Li*, Shiping Zhu*, “Modeling and kinetics of tandem polymerization of ethylene catalyzed by bis(2-dodecylsulfanyl-ethyl)”, Chem Eng Sci, 2008, 63: 2057-2065
223. Junwei Zhang, Hong Fan,* Bo-Geng Li,* and Shiping Zhu*, “Effect of catalysts supporting on tandem polymerization of ethylene stock in synthesis of ethylene−1-hexene copolymer”, Ind. Eng. Chem. Res., 2008, 47 (15): 5369-5375
222. Xiaoying Sun, Yingwu Luo*, Rui Wang, Bo-Geng Li, Shiping Zhu*, “Semi-Batch RAFT polymerization for producing ST/BA copolymers with controlled gradient composition profiles”, AIChE J, 2008, 54(4):1073-1087
221. Xiaoxiang Zhu, Bo-Geng Li*, Linbo Wu, Yougui Zheng, Shiping Zhu*, Klaus-Dieter Hungenberg, Stefan Müssig, Birgit Reinhard, “Kinetics and modeling of vinyl acetate graft polymerization from polyethylene glycol”, Macromol. React. Eng., 2008, 2, 321-333
220. Deling Li, Yingwu Luo*, Bo-Geng Li*, Shiping Zhu*, “Effect of rate retardation in RAFT grafting polymerization from silicon wafer surface”, J. Polym. Sci. Part A: Polym. Chem., 2008, 46 (3): 970-978
219. Ping Zhang, Linbo Wu*, Zhiyang Bu, Bo-Geng Li*, “Interfacial polycondensation of diphenolic acid and isophthaloyl chloride”,J. Appl. Polym. Sci., 2008, 108(6): 3586-3592
218. Linbo Wu*, Yan Zhang, Bo-Geng Li*, “ Novel Biodegradable aliphatic polymers derived from 5-hydroxylevulinic acid”, J. Polym. & Env., 2008, 16(1): 68-73
217. Weicao Wang, Linbo Wu*, Yuan Huang, Bo-Geng Li*, “Melt polycondensation of L-lactic acid catalyzed by 1,3-dialkylimidazolium ionic liquids”, Polymer International, 2008, 57(6):872-878
216. Linbo Wu*, Dan Cao, Yuan Huang, Bo-Geng Li, “Poly(L-lactic acid)/SiO2 nanocomposites via in situ melt polycondensation of L-lactic acid in the presence of acidic silica sol: Preparation and characterization”, Polymer, 2008, 49(3): 742-748
215. Lie Lu, Hong Fan*, Bo-Geng Li*, Shiping Zhu, “i-PP/EPR reactor alloy prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene supported iPP particles”, Chin. J. of Polym. Sci., 2008, 26(5): 597-604
214. Xiaojuan Zhang, Jing Gao, Yingwu Luo*, Bo-Geng Li, “Effect of monomer composition on the chain transfer constant of RAFT copolymerization of methyl methacrylate and butyl acrylate”, Acta Polymerica Sinica, 2008, (1): 83-87
213. Chang-Fu Deng, Hong Fan*, Chunwen Guo, Bo-Geng Li*, Shiping Zhu, “Grafting maleic anhydride onto hyperbranched polyethylene and suppression of chain degradation and crosslinking side reactions”, Acta Polymerica Sinica, 2008, (5): 435-441
212. Lei Yang, Yingwu Luo*, Bo-Geng Li, “RAFT semibatch miniemulsion polymerization of styrene”, J. Chem. Ind. & Eng. (China), 2008, 59(8): 2149-2153
211. Chunhui Wang, Bo-Geng Li*, Hong Fan, Baofang Li, Shiping Zhu, “New correlation model for the HLB values of ethylene oxide and propylene oxide block copolymers”, SCIENCEPAPER ONLINE, 2008, 3(3):189-194
210. Chufeng Yang, Hong Fan*, Chunwen Guo, Jintao Wan, Bo-Geng Li, “Preparation of hyperbranched polyethylene by copolymerization of ethylene and polar monomers”, Bulletin of Science and Technology (China), 2008, 24(3): 395-399, 405
209. Dong An, Linbo Wu*, Bo-Geng Li*, Shiping Zhu, “Synthesis and SO2 absorption/desorption properties of poly(1,1,3,3-tetramethylguanidine acrylate)”, Macromolecules, 2007, 40 (9): 3388-3393
208. Xiaoying Sun, Yingwu Luo*, Rui Wang, Bo-Geng Li*, Bei Liu, Shiping Zhu*, “Programmed synthesis of copolymer with controlled chain composition distribution via semibatch RAFT copolymerization”, Macromolecules, 2007, 40 (4): 849-859
207. Rui Wang, Yingwu Luo*, Bo-Geng Li, Shiping Zhu*, “Control of gradient copolymer composition in ATRP using semibatch feeding policy”, AIChE J, 2007, 53 (1): 174-186
206. Jing Gao, Yingwu Luo*, Rui Wang, Bo-Geng Li*, Shiping Zhu*, “Kinetics of methyl methacrylate and n-butyl acrylate copolymerization mediated by 2-cyanoprop-2-yl dithiobenzoate as a RAFT agent”, J. Polym. Sci. Part A: Polym. Chem., 2007, 45 (14): 3098-3111
205. Junwei Zhang, Bo-Geng Li*, Hong Fan, Shiping Zhu*, “Synthesis of ethylene-1-hexene copolymers from ethylene stock by tandem action of bis(2-dodecylsulfanyl-ethyl) amine-CrCl3 and Et(Ind)(2)ZrCl2”, J. Polym. Sci. Part A: Polym. Chem., 2007, 45 (16): 3562-3569
204. Yingwu Luo*, Bei Liu, Zuohe Wang, Jing Gao, Bo-Geng Li, “Butyl acrylate RAFT polymerization in miniemulsion”, J. Polym. Sci. Part A: Polym. Chem., 2007, 45 (11): 2304-2315
203. Fujun Lu, Yingwu Luo*, Bo-Geng Li, “A facile route to synthesize highly uniform nanocapsules: use of amphiphilic poly(acrylic acid)-block-polystyrene RAFT agents to interfacially confine miniemulsion polymerization”, Macromol. Rapid Commun., 2007, 28 (7): 868-874
202. Cunjin Xu, Bo-Geng Li*, Jintao Wan, Zhiyang Bu, “2-[(8-Hydroxyquinolin-5-yl)methoxy]ethyl acrylate”, Acta Crystallographica Section E-Structure Reports Online, 2007, 63(7): O3244-U3799
201. Deling Li, Yingwu Luo*, Bingzi Zhang, Bo-Geng Li*, Shiping Zhu, “RAFT grafting polymerization of MMA/St from surface of silicon wafer”, Acta Polymerica Sinica, 2007 (8): 699-704
200. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Preparation and Structure of polystyrene/montmorillonite nano-composite”, Acta Polymerica Sinica, 2007 (1): 70-74
199. Chun-Feng Zhu*, Bo-Geng Li, Ming Yao, Xiaoying Sun, “Characterization of coloring structure unit of polysiloxane modified polyurethane latex”, J Chem Eng of Chinese Univ, 2007, 21: 126-130
198. Dan Cao, Linbo Wu*, Bo-Geng Li, Yuan Huang, “Progress in nanocomposites of polylactic acid”, Chinese Polymer Bulletin, 2007 (10): 15-20
197. Zhiyang Bu*, Hong Fan, Jun Tan, Bo-Geng Li, Yuegang Shao, Bufan Ren, “Study on Synthesis and Analysis of Methyltriacetoxysilane”, Bulletin of Science and Technology (China), 2007, 23(5): 715-717, 770
196. Ming Yao, Bo-Geng Li, Chunfeng Zhu*, “The Preparation and Performance of Hydroxyl-containing Silicone Modified Waterborne Polyurethane”, Bulletin of Science and Technology (China), 2007, 23(4):574-577
195. Zhiyang Bu*, Hong Fan, Jun Tan, Bo-Geng Li, “Research Progress of Emulsion Adhesives”, Bulletin of Science and Technology (China), 2007, 23(4): 558-561
194. Weichao Wang, Linbo Wu*, Bo-Geng Li, Yuan Huang, “Synthesis and Physical Properties of 1-Alkyl-3-methylimidazolium L-Lactates”, Chinese Journal of Applied Chemistry, 2007, 24(4): 378-382
193. Jinhui Feng, Jun Tan, Chunmiao Zuo, Hong Fan*, Bo-Geng Li, “Organized modification of silica sol and its application in adhesives”, New Building Materials (China), 2007 (9): 58-61
192. Yanyan Wei*, Yingwu Luo, Baofang Li, Bo-Geng Li, “The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors”, Paint & Coatings Industry (China), 2007, 37(5): 30-33
191. Jing Gao, Yingwu Luo, Bo-Geng Li*, “1-phenylethyl phenyldithioacetate”, ACTA Crystallographica Section E-Structure Reports Online, 2006, 62(6): O2395- O2396
190. Bo-Geng Li*, Hong Fan, Jijiang Hu, Shiping Zhu, “Kinetics of propylene bulk polymerization with a spherical Ziegler-Natta catalysts”, Studies in Surface Science and Catalysis, 2006, 161: 253-270
189. Chunwen Guo, Hong Fan*, Bo-Geng Li, Shiping Zhu, “Branched-PE/i-PP ReactorBlends Prepared through Ethylene Gas-Phase Polymerization Catalyzed by α-Diimine Nickel Supported on iPP Particles”, Studies in Surface Science and Catalysis, 2006, 161: 245-252
188. Yanyan Wei*, Yingwu Luo, Baofang Li, Bo-Geng Li, “Polyurethane acrylate microgel synthesized by emulsion polymerization using unsaturated self-emulsified polymer”, Colloid and Polymer Science, 2006, 284(10): 1171-1178
187. Linbo Wu*, Dong An, Jie Dong, Zhengmin Zhang, Bo-Geng Li*, Shiping Zhu, “Preparation and SO2 Absorption/Desorption Properties of Crosslinked Poly(1,1,3,3-Tetramethylguanidine Acrylate) Porous Particles”, Macromolecular Rapid Communications, 2006, 27(22): 1949-1954
186. Y-W Luo*, R Wang, Y Lei, B Yu, B-G Li*, S-P Zhu, Effect of Reversible Addition Fragmentation Transfer (RAFT) Reactions on (Mini)Emulsion Polymerization Kinetics and Estimate of RAFT Equilibrium Constant, Macromolecules, 2006, 39: 1328-1337
185. Guo-Rong Li and B-G Li, “First Successful Post-Synthetic Self-Assembly of Polyaniline with Poly(N-vinylpyrrolidone) into Aqueous Nanocolloids”, Macromolecular Rapid Communications, 2006, 27: 854-858.
184. L Yang, Y-W Luo*, B-G Li, Reversible addition fragmentation transfer (RAFT) polymerization of styrene in a miniemulsion: A mechanistic investigation, Polymer, 2006, 47: 751-762
183. L Yang, Y-W Luo*, B-G Li, The Influence of Surfactant Coverage of the Mini-Droplets on RAFT Miniemulsion Polymerization，J. Polym. Sci. Part A: Polym. Chem, 2006, 44: 2293-2306
182. R Wang, Y-W Luo, B-G Li*, X-Y Sun, S-P Zhu*, Design and control of copolymer composition distribution in living radical polymerization using semi-batch feeding policies: a model simulation, Macromol. Theory Simul. 2006, 15: 356-368
181.  Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “The preparation of MMT-supported initiator and its application in the emulsion polymerization of styrene”, Acta Polymerica Sinica, 2006(6): 779-784
180. Ping Zhang, Linbo Wu, Bo-Geng Li*, “Ring-opening copolymerization of γ-valerolactone and ε-caprolactone catalyzed by boron trifluoride etherate”, Acta Polymerica Sinica, 2006(3): 510-515
179. Hong Fan*, Juncheng Zhou, Bo-Geng Li, “The evolution of chain transfer constant during the catalytic chain transfer polymerization of 2-hydroxypropyl methacrylate”, Acta Polymerica Sinica, 2006(2): 308-313
178. Jun Tan, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Conversion of methyltrichlorosilane in stirred bed reactor by methylalumminumchloride method”, Journal of Chemical Industry and Engineering (China), 2006, 57(12): 2871-2877
177. Jun Tan, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Activated carbon supported AlCl3 solid acid catalyst: structural characterization and catalytic properties for redistribution reaction of methylchlorosilane”, Journal of Chemical Industry and Engineering (China), 2006, 57(12): 2865-2870
176. Bo-Geng Li*, Bo Yu, Rong Fan, Wei Liu, Kun Cao, “Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst”, Journal of Chemical Industry and Engineering (China), 2006, 57(8): 1986-1991
175. Yan Zhang, Linbo Wu, Feng Li, Bo-Geng Li*, “Lactonization and condensation polymerization of 5-hydroxylevulinic acid”, Journal of Chemical Industry and Engineering (China), 2006, 57(4): 992-996
174. Jijiang Hu, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Kinetics of gas phase propylene polymerization using spherical TiCl4/MgCl2 catalyst”, Journal of Chemical Industry and Engineering (China), 2006, 57(2): 429-435
173. Yin Lu*, Lin Zhang, Huanlin Chen, Bo-Geng Li, “ The polymer-rich phase solidification process of PVDF-PVP-DMAc-H2O solution”, J Chem Eng of Chinese Univ, 2006, 20(4): 505-509
172. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite”, J. Chem. Ind. & Eng. (China), 2006，57(12): 3016-3020
171. Guangda Zhou, Kun Cao*, Zhen Yao, Bo-Geng Li, Guohua Hu, “Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder”,  J. Chem. Ind. & Eng. (China), 2006, 57(12): 3026-3028
170. Hong Fan*, Jun Tan, Zhiyang Bu, Bo-Geng Li, Yue-Gang Shao, “Study on redistribution of methyltrichlorosilane and low-boiling residues using activated carbon supported AlCl3 catalysts”, J Chem Eng of Chinese Univ, 2006, 20(3): 351-355
169. Xuefei Wang, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Preparation of dimethyldichlorosilane by redistributing methyltrichlorosilane and trimethylchlorosilane with AlCl3 supported catalysts”, Chemical Engineering (China), 2006, 34(1): 66-69
168. Yan Zhang, Linbo Wu, Feng Li, Zhiyang Bu, Bo-Geng Li*, “Synthesis of 5-hydroxylevulinic acid from levulinic acid”, Journal of Zhejiang University (Engineering Science), 2006, 40(11): 1895-1899
167. Jijiang Hu, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “On-line fast detection and control of composition for binary gas-phase copolymerization of olefins”, Journal of Zhejiang University (Engineering Science), 2006, 40(5): 827-831
166. Chunfei Wang, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Studies on Adhesion Performance of Epoxy Resin/Polymercaptan Toughened with Propoxylated Glycerin Triglycidyl Ether”, Polymer Materials Science & Engineering (China), 2006, 22(5): 209-212
165. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “PS/MMT nanocomposite prepared by in situ emulsion polymerization with cationic surfactant as emulsifier”, Polymer Materials Science & Engineering (China), 2006, 22(3):46-49
164. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Preparation, structure and property of ABS/MMT nanocomposite”, China Plastics Industry, 2006, 34(4): 26-28
163. Haiying Zhang, Linbo Wu, Ying Zhao, Bo-Geng Li*, “Advances in polymerization using ionic liquid as reaction media”, Chinese Polymer Bulletin, 2006, (4): 11-16
162. Jun Tan, Hong Fan*, Zhiyang Bu, Bo-Geng Li, Yuegang Shao, “Development of comprehensive utilization by redistribution and conversion of methyltrichlorosilane”, Bulletin of Science and Technology (China), 2006, 22(2): 200-205
161. Tintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Exfoliated PS/MMT nanocomposites prepared by emulsion polymerization”, Acta Polymerica Sinica, 2005(6): 819-824
160. Hong Fan*, Dapeng Zhou, Xuemei Liu, Zhiyang Bu, Bo-Geng Li, Peilin Shen, “Preparation of glass fiber reinforced phenolic injection molding materials and its properties”, Journal of Chemical Industry and Engineering (China), 2005, 56(10): 1993-1997
159. Dapeng Zhou, Hong Fan*, Zhiyang Bu, Bo-Geng Li, ‘Synthesis and characterization of N-phenyl maleimide modified novolac resin”, Journal of Chemical Industry and Engineering (China), 2005, 56(10): 1987-1992
158. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Montmorillonite reinforced SBR and effect on the vulcanization of rubber”, Acta Materiae Compositae Sinica, 2005, 22(2): 38-45
157. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, Swelling behavior of montmorillonite, rheological behavior of montmorillonite aqueous suspension and blend of suspension and emulsion”, Journal of the Chinese Ceramic Society, 2005, 33(12): 1457-1463
156. Jie Xu, Baofang Li*, Yingwu Luo, Gang Chen, Bo-Geng Li, “Synthesis and study of novel UV-curable powder coatings”, J Chem Eng of Chinese Univ, 2005, 19(5):712-715
155. Yanwu Zhang Hong Fan, Bo-Geng Li*, “Preparation of polypropylene/MMT nanocomposites using complex supported catalysts”, J Chem Eng of Chinese Univ, 2005, 19(1): 124-128
154. Weichao Wang, Linbo Wu*, Yuan Huang, Bo-Geng Li, “Synthesis of high molecular weight poly lactic acid with melt polycondensation”, Journal of Materials Science and Engineering (China), 2005, 23(special issue): 11-14
153. Xuemei Liu, Hong Fan*, Dapeng Zhou, Zhengzheng Ye, Bo-Geng Li, “Novalac phenolic resin improved by cashew shell oil: preparation and its molding material properties”, China Plastics, 2005, 19(11): 70-73
152. Yuan Huang, Kun Cao, Bo-Geng Li*, “Mechanism of bulk free-radical grafting polymerization of styrene onto polybutadiene”, China Synthetic Rubber Industry, 2005, 28(1): 8-11
151. Bo-Geng Li*, Yingwu Luo, “Production engineering: new developing space for chemical reaction engineering”, Chemical Industry and Engineering Progress (China), 2005, 24(4): 337-340
150. Bo Yu, Bo-Geng Li*, Ruiqin Wang, Kun Cao, “Study on power consumption of agitation in syndiospecific polymerization of styrene”, Chemical Industry and Engineering Progress (China), 2005, 24(3): 269-273, 294
149. Jun Tan, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Study on Redistribution of Methyltrichlorosilane and Trimethylchlorosilane over AlCl3 Supported Catalyst”, Chemical Reaction Engineering and Technology, 2005, 21(4): 315-319
148. Yan Zhang, Linbo Wu, Feng Li, Bo-Geng Li*, “Synthesis and characterization of altaicadispirolactone”, Synthetic Communications, 2005, 35 (21): 2729-2733
147. Lei Yang, Yingwu Luo*, Bo-Geng Li, “RAFT miniemulsion polymerization targeting to polymer of higher molecular weight”, J. Polym. Sci., Part A: Polym. Chem., 2005, 43 (20): 4972-4979
146. Yanyan Wei, Yingwu Luo*, Baofang Li, Bo-Geng Li, “Phase inversion of UV-curable anionic polyurethane in the presence of acetone solvent”, Colloid and Polymer Science, 2005, 283 (12): 1289-1297
145. Haitian Pan*, Luyue Xia, Yijun Cai, Bo-Geng Li, “Prediction of polymer quality based on stacked neural networks”, Bulletin of Science and Technology (China), 2004, 20(4): 298-302
144. Tao Lin, Baofang Li*, Kun Cao, Bo-Geng Li, “Study on styrene-maleic anhydride copolymer with high content of maleic anhydride”, Journal of Zhejiang University (Engineering Science), 2004, 38(3): 337-341
143. Hong Fan*, Liling Fu, Zhiyang Bu, Bo-Geng Li, “Modification of interface and mechanical properties of PP/magnesium hydrate whisker/POE composite”, China Plastics Industry, 2004, 32(9): 36-38
142. Hong Fan*, Dapeng Zhou, Zhiyang Bu, Bo-Geng Li, Peilin Shen, “Preparation of injectionable phenolic plastics with high thermal stability”, China Plastics, 2004, 18(7): 61-63
141. Hong Fan*, Dapeng Zhou, Zhiyang Bu, Bo-Geng Li, Guohua Yang, “Preparation of well-flowing injectionable phenolic plastics with high curing rate”, China Plastics, 2004, 18(2): 63-66
140. Qixia Zhang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Blending modification of PP by EPDM”, China Synthetic Rubber Industry, 2004, 27(3): 161-164
139. Lei Yang, Yingwu Luo, Bo-Geng Li, “RAFT polymerization in miniemulsion a mechanical investigation”, DECHEMA Monographien, 2004, 138, 473-478
138. Bo-Geng Li, Kun Cao, Rong Fan, Bo Yu, “Kinetics study on syndiotatic polymerization of styrene with homogeneous metallocene catalysts”, DECHEMA Monographien, 2004, 138, 255-259
137. Guo-Hua Hu, Hervé Cartier, Lian-Fang Feng, Bo-Geng Li, “Kinetics of the in situ polymerization and in situ compatibilization of poly(propylene) and polyamide 6 blends”, Journal of Applied Polymer Science，2004, 91(3): 1498-1504
136. B. Huang, K. Cao, Bo-Geng Li, Shiping Zhu, “Syndiospecific styrene polymerization with CpTiCl3/MAO: Effects of the order of reactant addition on polymerization and polymer properties”, Journal of Applied Polymer Science, 2004, 94(4):1449-1455
135. Wenjun Wang, Zhibin Ye, Hong Fan, Bo-Geng Li, Shiping Zhu, “Dynamic mechanical and rheological properties of metallocene-catalyzed long-chain-branched ethylene/propylene copolymers”, Polymer, 2004, 45, 5497-5504
134. Yanyan Wei, Yingwu Luo, Baofang Li, Bo-Geng Li, Water-soluble UV curable urethane methyl acrylate coating：preparation and properties”，Journal of Zhejiang University: Science, 2004, 5(8), 906-911
133. Baofang Li*, Kun Cao, Yaling Xu, Bo-Geng Li, “Synthesis of poly(N-isopropylacrylamide) hydrogel particles”, Journal of Zhejiang University (Engineering Science), 2004, 38(8): 1078-1082
132. Jintao Yang, Hong Fan, Zhiyang Bu, Bo-Geng Li*, “Styrene-butadiene rubber/attapulgite nanocomposites prepared by in situ emulsion polymerization”, Modern Chemical Industry (China), 2004, 24(7): 36-39
131. Yuan Huang, Kun Cao, Baofang Li, Bo-Geng Li*, “Kinetics of bulk graft copolymerization of styrene from rubber”, Journal of Chemical Industry and Engineering (China), 2004, 55 (6): 985-990
130. Zhiyang Bu, Hong Fan*, Bo-Geng Li, “Conversion and utilization of byproducts in direct synthesis of methylchlorosilanes”, Journal of Chemical Industry and Engineering (China), 2004, 55(5): 842-845
129. Lei Yang, Yingwu Luo*, Bo-Geng Li, “RAFT miniemulsion polymerization of styrene”, Acta Polymerica Sinica, 2004 (3): 462-464
128. Yin Lu, Huanlin Chen, Bo-Geng Li*, “Effect of solvent concentration on decelopment of macrovoids of PVDF phase-inversion membranes”, Acta Polymerica Sinica, 2004(6): 852-857
127. Yuan Huang, Kun Cao, Baofang Li, Bo-Geng Li*, “Studies on grafting kinetics of bulk copolymerization of styrene from rubber (I) Grafting behavior”, Chemical Journal of Chinese Universities, 2003, 24(7): 1338-1340
126. Bo-Geng Li*, Bo Yu, Kun Cao, “Advances in modification of syndiotactic polystyrene”, Chemical Industry and Engineering Progress (China), 2003, 22(6): 559-563
125. Hong Fan*, Zhenyu, Xu, Zhiyang Bu, Bo-Geng Li, “Siloxane-modified polyester:synthesis and features of its powder coatings”, Modern Chemical Industry (China), 2003, 23(6): 32-34
124. Zhenyu Xu, Hong Fan*, Zhiyang Bu, Bo-Geng Li*, “Modification and application of silicone in powder coatings”, Modern Chemical Industry (China), 2003, 23(5): 13-16
123. Ping Wang*, Yanmin Xia, Zhiqiang Chen, Yuan Huang, Kun Cao, Bo-Geng Li, “ Study on semi-continuous bulk polymerization for impact-resistant SMA in a pilot plant”, Modern Chemical Industry (China), 2003, 23(1): 29-32
122. Dapeng Zhou, Hong Fan*, Zhiyang Bu, Shengnan Xie, Bo-Geng Li, “The Properties of injection molding and rheology of phenolic resin”, China Plastics, 2003, 17(11): 53-56
121. Dapeng Zhou, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “In situ preparation of phenolic resin/magnesium salt whisker composites and their properties”, China Plastics, 2003, 17(1): 72-77
120. Haitian Pan*, Yanhua Chen, Bo-Geng Li, “Modeling of bulk copolymerization of styrene and maleic anhydride based on the artificial neural networks”, J Chem Eng of Chinese Univ, 2003, 17(2): 195-200
119. Jinglong Xu, Hong Fan, Bo-Geng Li*, Naixiang Li, Ping Chao, “Study on the influence of nanoclay on polycondensation of poly-(ethylene terephthalate)”, J Chem Eng of Chinese Univ, 2003, 17(1): 48-54
118. Wumin Yu, Kun Cao*, Yuan Huang, Bo-Geng Li, “Living free-radical copolymerization of styrene and maleic anhydride”, J Chem Eng of Chinese Univ, 2003, 17(supplement): 54-58
117. Zhiguo Li, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Effect of catalyst on esterification for rosin modified phenolic resin and on product properties”, J Chem Eng of Chinese Univ, 2003, 17(supplement): 49-53
116. Zhenyu Xu, Hong Fan*, Zhiyang Bu, Bo-Geng Li, “Preparation of silicone modified polyester and its application in powder coating”, J Chem Eng of Chinese Univ, 2003, 17(supplement): 43-48
115. Xin Liu, Hong Fan*, Zhiyang Bu, Angran, Wang, Bo-Geng Li, “Copolymers of styrene and acrylic monomers with low MW and narrow MWD: preparation and structure control”, Chem Eng of Chinese Univ, 2003, 17(supplement): 36-42
114. Gang Chen, Baofang Li*, Yingwu Luo, Bo-Geng Li, “UV-crosslinkable powder coating of polyester/epoxy resin: effect of resin structure on the film properties”, J Chem Eng of Chinese Univ, 2003, 17(supplement): 26-31
113. Wei Liu*, Bo-Geng Li, Jiong Shen, Zu-Ren Pan, “Determination and application of Mark-Houwink constants of syndiotactic polystyrene, Polymer Materials Science & Engineering (China), 2003, 19(3): 187-189
112. Yuefeng Ma, Baofang Li*, Gang Chen, Yingwu Luo, Bo-Geng Li, “Study on the cured film properties of UV curing powder coatings”, Thermosetting Resin (China), 2003, 18(3): 1-3
111. Rong Fan, Bo-Geng Li*, Kun Cao, Wen-Le Zhou, Zhi-Gang Shen, Meng Ye, “Full-range kinetic study on bulk syndiotactic polymerization of styrene with homogeneous metallocene catalysis”, Journal of Applied Polymer Science, 2002, 85(13): 2635-2643
110. Hong-Dong Duan, Wan-Guo Hou, De-Jun Sun, Bo-Geng Li, “Effect of cationic surfactant on the gelation of HPAM by Cr (III)”, Chinese Chemical Letters, 2002, 13(6): 573-574
109. You-Gang Mao, M. Wang, Bai Yang, Bo-Geng Li,, Fei Li, Jia-Cong Shen, “The effect of medium environment on propagating step in free-radical polymerization”, J. Phys. Chem B., 2002, 106: 4602-4607.
108. Yin Lu*, Huanlin Chen, Bo-Geng Li, “Influence of additives on phase separation process of PVDF solution and membrane morphology”, Acta Polymerica Sinica, 2002(5): 656-661
107. Yin Lu*, Huanlin Chen, Bo-Geng Li, “Effects of preparing condition on PVDF membrane morphology”, Journal of Functional Polymers (China), 2002, 15(2): 171-176
106. Haitian Pan*, Yanhua Chen, Yijun Cai, Bo-Geng Li, “Application of artificial neural networks in polymerization process”, Chemical Industry and Engineering Progress (China), 2002, 21(5): 314-318
105. Jilong Xu, Bo-Geng Li*, Naixiang Li, Ping Chao, “Kinetics of isothermal crystallization for PET/ montmorillonite nanocomposites”, Polymer Materials Science & Engineering (China), 2002, 18(6): 149-152
104. Wei Liu, Bo-Geng Li*, Zhigang Fang, Zu-Ren Pan, “Study on thermal properties of syndiotactic polystyrene”, China Synthetic Resin and Plastics, 2002, 19(1): 6-9
103. Hongdong Duan, Wanguo Hou*, Dejun Sun, Shangying Liu, Lushan Wang, Bo-Geng Li, “ Rheological study of the crosslinking reaction between polyacrylamide and Cr (III) effect of concentration”, Acta Chimica Sinica, 2002, 60(4): 580-584
102. Hongdong Duan*, Wanguo Hou, Shuhua Han, Yumin Wu, Bo-Geng Li, “Study on composition of chrominum and chrominum/aluminum complex salts of organic salts as crosslinkers for aqueous polymer gels”, Oilfield Chemistry (China), 2002, 19(1): 43-46
101. Hongdong Duan, Wanguo Hou*, Lushan Wang, Ximing Li, Bo-Geng Li, “Research Methods of the Crosslinking Reaction of HPAM/Cr (III) systems”, Chinese Polymer Bulletin,2002(2): 49-55
100. Linbo Wu, Bo-Geng Li, Baofang Li, and Kun Cao, “Kinetics and Mechanism of Bulk Polymerization of Styrene Catalyzed by Rare Earth Catalyst”, Chinese J. of Chem. Eng., 2001, 9(4): 367-372
99. Rong Fan, Kun Cao, Bao-Fang Li, Hong Fan and Bo-Geng Li, “Morphology and Crystallinity of Nascent sPS in Bulk Polymerization with Homogeneous Metallocene Catalyst”, Euro. Polym. J., 2001,37,2335-2338.
98. Lin-Bo Wu, Bo-Geng Li*, Kun Cao, and Bao-Fang Li, “Styrene Polymerization with Ternary Neodymium-based Catalyst System: Effects of Catalyst Preparation Procedures” Euro. Polym. J., 2001, 37, 2105-2110.
97. Xiao-Lin Xie, Bo-Geng Li, Zu-Ren Pan, K.Y.R. Li, and S.C. Tjong, “Effect of Talc/MMA In-situ Polymerization on Mechanical Properties of PVC-Matrix Composites, J. Appl. Polym. Sci, 2001, 80, 2105-2112.
96. Linbo Wu, Bo-Geng Li*, Baofang Li, “Rheology of ultra high molecular weight polystyrene”, Acta Polymerica Sinica, 2001(5): 633-638
95. Ruian Huang, Kun Cao, Hong Fan, Baofang Li, Bo-Geng Li*, “Novel development in outdoors powder coating”, Journal of Functional Polymers (China), 2001, 14(2): 226-230
94. Yanwu Zhang, Hong Fan, Bo-Geng Li*, “Polyolefin nanocomposites and its preparation technology”, New Building Materials (China), 2001(6): 12-15
93. Rong Fan, Bo-Geng Li*, Wei Liu, Kun Cao, Lianfang Feng, Wenle Zhou, Zhigang Shen, Meng Ye, “Effects of agitation on the preparation of syndiotactic polystyrene with homogeneous metallocene catalyst”, J Chem Eng of Chinese Univ, 2001, 15(5): 429-433
92. Hua Yan*, Bo-Geng Li, Baofang Li, Zuren Pan, “A theoretical model of supramolecular SLCP induced by H-bonds”, Chemical Journal of Chinese Universities, 2000, 21(11): 1756-1761
91. Kun Cao*, Jian Yu, Bo-Genang Li, and Zu-Ren Pan, “Micron-size uniform poly(methyl methacrylate) particles bg Li, Bao-Fy dispersion polymerization in polar media I. Particle size and particle size distribution”, Chem. Eng. J., 2000, 78: 211-215
90. Zhen Yao, Bo-Geng Li*, Kun Cao, Yuan Huang, and Zu-Ren Pan, “Modeling for the diffusion limitation of free radical polymerization”, J. Zhejiang Univ., 2000, 1(2): 148-156
89. Kun Cao*, Bo-Geng Li, and Zu-Ren Pan, “Micron-size functional uniform PMMA particles by dispersion copolymerization in polar media”, in Polymer in Dispersed Media, Macromolecular Symposia, 2000, 15: 195-200
88. Kun Cao*, Bao-Fang Li, Yuan Huang, Bo-Geng Li, and Zu-Ren Pan, “Mechanism and model of dispersion polymerization using homopolymer as dispersant in polar media”, in Polymer in Dispersed Media, Macromolecular Symposia, 2000, 15: 187-194
87. Yuan Chen, Baofang Li, Kun Cao, Bo-Geng Li*, “Phase inversion during bulk polymerization of N-phenyl maleimide/styrene in presence of polybutadiene (II) Effects of operation conditions and recipes on occurrence of phase inversion and structure of rubber phase”, Journal of Chemical Industry and Engineering (China), 2000, 51(4): 506-511
86. Yuan Chen, Baofang Li, Kun Cao, Bo-Geng Li*, “Phase inversion during bulk polymerization of N-phenyl maleimide/styrene in presence of polybutadiene (I) Changes of physical characteristics of polymerizing system during phase inversion”, Journal of Chemical Industry and Engineering (China), 2000, 51(3): 362-366
85. Zhangqing Yu, Bo-Geng Li*, Baofang Li, Zu-Ren Pan, :Stability of the emulsion copolymerization process of the latex containing glycidyl and amino groups”, Chemical Reaction Engineering and Technology (China), 2000, 16(2): 169-174
84. Yuan Huang, Yingwu Luo, Baofang Li, Bo-Geng Li*, “Preparation and research progress of transparent high-impact polystyrene(THIPS)”, Chemical Industry and Engineering Progress (China), 2000, 19(6): 24-27
83. Hongdong Duan*, Yuezhi Cui, Chuanshan Zhao, Qingsi Zhang, Shitai Wang, Bo-Geng Li, “Study on coating technology of pearlescent coated paper”, Paper Science & Technology (China), 2000(5):17-19
82. Kun Cao, Bo-Geng Li, and Zu-Ren Pan, “Micron-size uniform poly(methyl methacrylate) particles by dispersion polymerization in polar media IV. Monomer partition and locus of polymerization”, Colloids & Surfaces A: Physio-chem. & Eng. Aspects, 1999, 153, 179-187 (SCI 07913919).
81. Zhang-QingYu, Bo-Geng Li, Bao-Fang Li, and Zu-Ren Pan, “Preparation and characterization of MMA-BA-DMAEMA terpolymer latex”, Colloids & Surfaces A: Physio-chem. & Eng. Aspects, 1999, 153, 31-38 (SCI 07913901).
80. Zhen Yao, Bo-Geng Li, Wen-Jun Wang, and Zu-Ren Pan, “Continuous thermal bulk copolymerization of styrene and maleic anhydride”, J. Appl. Polym. Sci., 1999, 73, 615-622.
79. Zhangqing Yu, Bo-Geng Li*, Baofang Li, Zu-Ren Pan,  “Stability of the GHD latex crosslinkable at ambient temperature”, Chemical Journal of Chinese Universities, 1999, 20(6): 978-983
78. Xiaolin Xie*, Bo-Geng Li, Zu-Ren Pan,  “Synthesis of rigid long side-chain liquid crystalline polymers with intermolecular hydrogen bonds”, Chemical Journal of Chinese Universities, 1999, 20(3): 489-491
77. Rong Fan, Wei Liu, Bo-Geng Li*, Baofang Li,  “Advances in supported metallocene catalysts”, Polymer Materials Science & Engineering (China), 1999, 15(6): 1-5
76. Xiaolin Xie*, Bo-Geng Li, Yuan Chen, “Morphology and compatilizing mechanism of PA6/PP blends compatilized by R-SMA”, Polymer Materials Science & Engineering (China), 1999, 15(5): 107-110
75. Zhangqing Yu, Bo-Geng Li*, Baofang Li, Zu-Ren Pan, “Electrolyte stability of MMA-BA-DMAEMA terpolymer latex”, Polymer Materials Science & Engineering (China), 1999, 15(4): 103-106
74. Zhangqing Yu, Bo-Geng Li*, Baofang Li, Zu-Ren Pan, “Emulsion copolymerization of MMA-BA-GMA”, Polymer Materials Science & Engineering (China), 1999, 15(1): 50-53
73. Linbo Wu, Baofang Li, Kun Cao, Bo-Geng Li*, “Studies on continuous precipitation copolymerization of acrylonitrile in aqueous medium with high monomer feed concentration II. Particle morphology”, Chemical Reaction Engineering and Technology (China), 1999, 15(4): 373-381
72. Linbo Wu, Baofang Li, Kun Cao, Bo-Geng Li*, “Studies on continuous precipitation copolymerization of acrylonitrile in aqueous medium with high monomer feed concentration I. Conversion, MW and MWD”, Chemical Reaction Engineering and Technology (China), 1999, 15(4): 364-372
71. Wei Liu, Bo-Geng Li*, Rong Fan, Kun Cao et al., “Studies on bulk syndiotactic polymerizatuion of styrene catalyzed by metallocene”, Chemical Reaction Engineering and Technology (China), 1999, 15(3): 231-236
70. Zhangqing Yu, Bo-Geng Li*, Baofang Li, Zu-Ren Pan, “Process stability of the emulsion copolymerization of MMA-BA-DMAEMA”, Journal of Zhejiang University, 1999, 33(1): 57-62
69. Zhangqing Yu*, Bo-Geng Li, Zu-Ren Pan, “Electrolyte stability of the MBHD copolymer latex”, J. South China Univ. Tech. (Natural Sci.), 1999, 27(9): 117-121
68. Zhang-Qing Yu*, Huan-Qin Chen, Bo-Geng Li, Zu-Ren Pan, “Process stability of the emulsion polymerization of the GHD Latex”, J. South China Univ. Tech. (Natural Sci.), 1999, 27(5): 40-44
67. Zhangqing Yu, Bo-Geng Li*, Zu-Ren Pan, “Advance in crosslinkable acrylic latex for coating”, Chinese Polymer Bulletin, 1999(2): 22-30
66. Yuan Chen, Baofang Li, Kun Cao, Bo-Geng Li*, “Structure and properties of styrene/N-phenyl maleimide/polybutadiene copolymer” Chemical World (China), 1999, supplement: 48-54
65. Zhangqing Yu*, Bo-Geng Li, Huanqin Chen, Zu-Ren Pan, “Effect of composition on properties of curried film of the GDA latex selfcrosslinkable at ambient temperature”, Chemical Materials for Construction (China), 1999(5): 17-19
64. Zhangqing Yu*, Huanqin Chen, Bo-Geng Li, Zu-Ren Pan, “Effect of composition on stability of latex selfcrosslinkable at ambient temperature”, Chemical Materials for Construction (China), 1999(4): 15-17, 20
63. Xiaolin Xie*, Bo-Geng Li, Zu-Ren Pan, “The in situ compatibilizing, reinforcing and toughening of liquid crystal polyester-amide for PET/PA66 blend”, China Synthetic Resin and Plastics, 1999, 16(4): 8-11
62. Zhangqing Yu*, Bo-Geng Li, Zu-Ren Pan, “Particle size and its distribution of GAD latex selfcrosslinkable at ambient temperature”, China Adhesives, 1999, 8(3): 34-36
61. Zhangqing Yu*, Huanqin Chen, Bo-Geng Li, Zu-Ren Pan, “Stability of emulsion polymerization process of acrylic monomers with functional groups”, New Building Materials (China), 1999(4): 33-35
60. Zhen Yao, Bo-Geng Li*, Kun Cao, and Zu-Ren Pan, “Semicontinuous thermal bulk copolymerization of styrene and maleic anhydride: experiments and reactor model”, J. Appl. Polym. Sci., 1998, 67: 1905-1912
59. Zhangqing Yu*, Bo-Geng Li, Baofang Li, Zu-Ren Pan, “Stability of emulsion copolymerization of acrylic monomers containing amino and hydroxyl groups”, Chemical Journal of Chinese Universities, 1998, 19(3): 472-476
58. Wei Liu Bo-Geng Li*, Baofang Li, “Syndiotactic polymerization of styrene and industrialization”, Chemical Industry and Engineering Progress (China), 1998, 17(2): 10-12, 16
57. Hua Yan*, Bo-Geng Li, Baofang Li, Xiaolin Xie, “Liquid crystallization of styrene and maleic anhydride copolymer induced by hydrogen bond: synthesis and characterization of SLCP complex with single hydrogen bond”, Journal of Functional Polymers (China), 1998, 11(1): 91-94
56. Hua Yan, Bo-Geng Li*, Baofang Li, Zu-Ren Pan, “Synthesis and characterization of hydrogen-bonded complex based on poly(styrene-maleic anhydride”, Chinese Chemical Society, 1998(12): 54-56, 34
55. Xiaolin Xie*, Bo-Geng Li, Zu-Ren Pan, “Hot potato and exploration of polymeric main-chain liquid crystalmaterials”, Discovery of Nature (China), 1998, 13(1): 22-26
54. Zhangqing Yu*, Bo-Geng Li, Huanqin Chen, Zu-Ren Pan, “The stability of polymeric latex”, Paint & Coatings Industry (China), 1998(11): 41-44
53. Xiaolin Xie* Baoqin Shentu, Bo-Geng Li, Zu-Ren Pan, “Rheology of PET/PA66/liquid crystal polyester-amide blend”, Chemical Journal of Chinese Universities, 1997, 18: 1551-1555
52. Xiaolin Xie*, Bo-Geng Li, Zu-Ren Pan, “Preparation of PET/PA66 blend using liquid crystal polyester-amide as compatibilizer”, Polymer Materials Science & Engineering (China), 1997, 13 (supplement): 55-59
51. Hua Yan*, Bo-Geng Li, Xiaolin Xie, Zu-Ren Pan, “Advance in molecular engineering of polymeric side-chain liquid crystal”, Polymer Materials Science & Engineering (China), 1997, 13 (supplement): 27-32
50. Xiaolin Xie*, Baoqin Shentu, Bo-Geng Li, Zu-Ren Pan, “Rheology of PET/liquid crystal polyester-amide blend”, Journal of Zhejiang University, 1997, 31: 562-566
49. Hua Yan*, Bo-Geng Li, Zu-Ren Pan, “New development on polymeric side-chain liquid crystal”, China Plastics, 1997, 11(1): 13-18
48. Zhangqing Yu, Bo-Geng Li*, Zu-Ren Pan, “Particle size and its distribution of MA-BA-DMAEMA copolymer latex”, Paint & Coatings Industry, 1997(5): 5-8
47. Xiaolin Xie*, Bo-Geng Li, Baoqin Shentu, Yuan Chen, “Morphology and rheology of PA6/PP blend compatibilized by R-SMA”, Engineering Plastics Application (China), 1997, 25: 50-52, 62
46. Zhen Yao, Bo-Geng Li*, Kun Cao, Zu-Ren Pan, “Manufacturing technology for R-SMA resin”, Chemical Production and Technology (China), 1997, 4(4): 11-16
45. Zhen Yao, Bo-Geng Li*, Kun Cao, Zu-Ren Pan, “Polymerization mechanism, structure and properties of high impact polystyrene”, Chemical Production and Technology (China), 1997, 4(3): 20-26
44. Wenjun Wang, Bo-Geng Li*, Zaizhang Yu, Zu-Ren Pan, “Modeling of semi-continuous emulsion polymerization”, Chinese Polymer Bulletin, 1996(1): 57-62
43. Bo-Geng Li*, “Status quo and progress of polymer materials”, Chemical Production and Technology (China), 1996, 3[4]:
42. Wen-Jun Wang, Zai-Zhang Yu*, Bo-Geng Li, and Zu-Ren Pan, “Seeded semicontinuous emulsion multi-copolymerization of (meth)acrylates with high solid content: Effect of operation conditions”, Acta Polymerica Sinica, 1995, 13: 162-172
41. Zai-Zhang Yu*, Bo-Geng Li, Ming-Jian Cai, Bao-Fang Li, “Emulsion polymerization of methyl methacrylate in concentrations of emulsifiers below their CMCs: polymerization rate, particle size, and particle size distributions”, J. Appl. Polym. Sci., 1995, 55: 1209-1215
40. Zhen Yao, Bo-Geng Li*, Kun Cao, Zu-Ren Pan, “Modeling of thermal bulk random copolymerization of styrene and maleic anhydride”, DECHEMA Monographs, 1995, 131: 445-454
39. Wen-Jun Wang, Bo-Geng Li*, Zai-Zhang Yu, and Zu-Ren Pan, “Modeling of seeded semicontinuous emulsion copolymerization of butyl acrylate and 2-ethyl hexyl acrylate”, DECHEMA Monographs, 1995, 131: 123-132
38. Kun Cao, Zaizhang Yu, Bo-Geng Li, Baofang Li, “Structure and properties of random copolymer of styrene and maleic anhydride”, Progress in Natural Science (China), 1995, 5: 447-454
37. Qiang Lu, Bo-Geng Li*, Zaizhang Yu, “Application of semibatch emulsion copolymerization for composition control”, Chemical Industry and Engineering Progress (China), 1995(3): 37-41
36. Wenjun Wang, Bo-Geng Li*, Zaizhang Yu, Zu-Ren Pan, “Semicontinuous emulsion polymerization”, Chinese Polymer Bulletin, 1995(1): 44-49
35. Wenjun Wang, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “A method for Preparation of high solid content latex”, China Synthetic Resin and Plastics, 1995, 12(3): 50-54
34. Wenjun Wang, Bo-Geng Li*, Baofang Li, Kun Cao, “Surface properties of complex surfactants: determination of CMC”, Surfactant Industry (China), 1995(1): 16-18, 33
33. Bo-Geng Li*, Renhe Lin, Zaizhang Yu, Kun Cao, Baofang Li, “Emulsion copolymerization of VDC and methyl acrylate”, China Synthetic Rubber Industry, 1994(1): 27-30
32. Jiwei Huang, Zaizhang Yu*, Bo-Geng Li, Baofang Li, “ Kinetics of emulsion copolymerization of acrylic monomers containing hydroxyl group”, Coating Application (China), 1994(1): 14-18
31. Zhaoyu Ren, Zaizhang Yu*, Bo-Geng Li, “Toughening thermal plastic resin using core-shell elastomer”, Chinese Polymer Bulletin,, 1994(3): 176-180
30. Kun Cao, Zaizhang Yu*, Bo-Geng Li, “Progress in random copolymerization of styrene and maleic anhydride”, Chinese Polymer Bulletin, 1994(2): 97-102
29. Bo-Geng Li and B.W. Brooks*, “Prediction of the average number of radicals per particle for emulsion polymerization”, J. Polym. Sci., Part A: Polym. Chem., 1993, 31: 2397-2402
28. Bo-Geng Li and B.W. Brooks*, “Modeling and simulation of semibatch emulsion polymerization”, J. Appl. Polym. Sci., 1993, 48: 1811-1823
27. Zai-Zhang Yu, Hong-Bing Jia, Bo-Geng Li, and Bao-Fang Li, “Mechanism and kinetics of emulsion copolymerization of vinylidene chloride”, Polym. Intern., 1993, 30: 441-444
26. Zu-Ren Pan*, Bo-Geng Li, “Polymer Reaction Engineering: a review”, Progress in Natural Science (China), 1993(2): 109-114
25. Limin Wu, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “Study on emulsion graft copolymerization of styrene and acrylonitrile from polybutyl acrylate”, Journal of Functional Polymers (China), 1993, 6(2): 109-116.
24. Bo-Geng Li*, Zu-Ren Pan, “Progress in polymer reaction engineering”, China Synthetic Rubber Industry, 1993, 16(1): 1-2
23. Bo-Geng Li and B.W. Brooks*, “Semi-batch processes for emulsion polymerization”, Polym. Intern., 1992, 29: 41-46
22. Bo-Geng Li and B.W. Brooks*, “Emulsion polymerization in semi-batch reactor”, DECHEMA Monographs, 1992, 127: 369-377
21. Bo-Geng Li*, Renhe Lin, Kun Cao, Zaizhang Yu, “Determination of Mark-Houwink constants of VDC copolymer from GPC谱and [h] data”, Acta Polymerica Sinica, 1992(1): 56-60
20. Limin Wu, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “Composition, structure and properties of AAS core-shell particles”, Petrochemical Technology (China), 1992, 21(1): 1-5
19. Limin Wu, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “Studies on ASA core-shell emulsion polymerization: polymerization kinetics and grafting ratio”, China Plastics Industry, 1992, 20(2): 25-28
18. Limin Wu, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “Mechanical properties of PVC improved by ASA”, Plastics (China), 1992, 21(4): 14-17
17. Limin Wu, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “Study on emulsion polymerization of butyl acrylate with crosslinking agent”, Paint & Coatings Industry (China), 1992(1): 1-3
16. Jianqing Zhao, Bo-Geng Li, Huigen Yuan, Zu-Ren Pan, “Progress of precipitation polymerization of acrylonitrile in aqueous medium”, Chinese Polymer Bulletin, 1992(1): 1-8
15. Bo-Geng Li*, Jianqing Zhao, Huigen Yuan, Zu-Ren Pan, “A macro-kinetic model for continuous polymerization of acrylonitrile in aqueous medium”, Journal of Chemical Industry and Engineering (China), 1991, 42(2): 162-170
14. Limin Wu, Bo-Geng Li*, Zaizhang Yu, Zu-Ren Pan, “Apparent reactivity ratio and azeotropic composition of styrene and acrylonitrile emulsion copolymerization”, Acta Polymerica Sinica, 1991(4): 478-481
13. Limin Wu, Zaizhang Yu*, Bo-Geng Li, Zu-Ren Pan, “Supplementary adding of emulsifier during core-shell emulsion polymerization of ASA”, Polymer Materials Science & Engineering (China), 1991, 7(6): 9-12
12. Hongbing Jia, Zaizhang Yu*, Bo-Geng Li, Zu-ren Pan, “An excellent gas-barrier materials: PVDC latex”, Chinese Polymer Bulletin,, 1991(3): 163-168
11. Jianqing Zhao*, Bo-Geng Li, Huigen Yuan, Zu-Ren Pan, “Modeling of continuous precipitation polymerization of acrylonitrile in aques medium”, Chemical Reaction Engineering and Technology, 1990, 6(1): 19-25
10. Limin Wu*, Bo-Geng Li, Zaizhang Yu, Zu-Ren Pan, “Research Progress in core-shell polymer particles”, Chinese Polymer Bulletin,, 1990(2): 71-76
9. Bo-Geng Li*, Jianqing Zhao, Huigen Yuan, Zu-Ren Pan, “Process study on continuous polymerization of acrylonitrile in aqueous medium”, Synthetic Fiber in China, 1987, 16(1): 1-9
8. Bo-Geng Li, Zi-Qiang Zhu*, and You-Shou Luo, “Calculation of salt effect on vapor-liquid equilibrium by a new pseudo binary approach”, Fluid Phase Equilibria, 1986, 27, 491-500
7. Bo-Geng Li, You-Shou Luo*, and Zi-Qiang Zhu, “Vapor-liquid equilibria for salt-containing systems by equation of state”, Chinese J. Chem. Eng., 1986, 1(2): 102-110
6. Bo-Geng Li*, You-Shou Luo, Zi-Qiang Zhu, “Study on vapor-liquid equilibria for salt-containing solutions by equation of state”, Journal of Chemical Industry and Engineering (China), 1986, 37(1): 51-58
5. You-Shou Luo*, Pei-Lin Chen, Bo-Geng Li, Jian-Dong Zhou, and Zi-Qiang Zhu, “Excess enthalpies for binary liquid mixtures of CCl4 with Alcohols, Fluid Phase Equilibria, 1985, 25: 137-144
4. Bo-Geng Li*, Jiyuan Zhu, You-Shou Luo, Zi-Qiang Zhu, “Vapor-liquid equilibria for salt-containing solutions: experiments and calculation”, Petrochemical Technology (China), 1985, 14(2): 79-85
3. Zi-Qiang Zhu*, Bo-Geng Li, “Solution thermodynamics for phase equilibria: status quo and progress”, Journal of Zhejiang University, 1985, 19(1): 1-9
2. Bo-Geng Li*, Zaizhang Yu, Qizhen Cai, Baofang Li, “Studies on Polymerization Kinetics of MMA at high conversion”, Chinese J Polym Sci, 1984(1): 82-91
1. Bo-Geng Li*, Zaizhang Yu, Qizhen Cai, Bofang Li, “Kinetics of methyl methacrylate bulk polymerization at high conversion”, Acta Polymerica Sinica, 1984(5): 326-332
Invited and Keynote Speaker in International Conferences
16. “Effect of Catalyst Support and Polymerization Process on Morphology of PP/EPR Reactor-in Alloy”, 3rd Asian Polyolefin Workshop (APO2009), Oct.27-30, 2009, Seoul/Korea
15. “Modeling of Polymerization Process for Chain Structure Tailor-making”, 13th Asian Chemical Congress, Sept.14-16, 2009, Shanghai/China
14. “Kinetic modeling of ethylene tandem catalytic reaction for LLDPE”, International Workshop on Olefin Polymerization Kinetics, Apr.3-5, 2008, Tokyo/Japan
13. “Chemical Engineering Research for Advanced Polymer Materials”, China (Ningbo) International Forum on Advanced Materials and Commercialization 2007, Nov.11-14, 2007, Ningbo/China
12. “Synthesis of LLDPE from Ethylene Stock by Tandem Action of Bis(2-dodecylsulfanyl-ethyl)amine-CrCl3 and Et(Ind)2ZrCl2 with Various Support Strategies”, 5th International Workshop on Heterogeneous Ziegler-Natta Catalysts, March 18-21, 2007, Kanazawa/Japan
11. “Styrene-Butadiene Rubber/ Montmorillonite Nanocomposites: preparation and Properties”, 13th Regional Synposium on Chemical Engineering, Dec.3-5, 2006, Singapore
10.“Propylene Bulk Polymerization with a Spherical Ziegler-Natta Catalyst--Kinetics and Particle Morphologies”, Asian Polyolefin Workshop 2005 (APO2005), Dec.7-9, 2005, Nara/Japan
9. “Preparation of Non-polar Polymer/Clay Nanocomposite by In-situ Polymerization”, JAIST International Symposium on Nano Technology 2005, Sept. 15-17, 2005, Kanazawa/Japan
8. “RAFT Miniemulsion Polymerization and its Application in Preparation of Polymeric Microspheres”, 2nd International Symposium on Polymeric Microspheres, Mar. 29-31, 2005, Fukui/Japan
7. “Production Engineering: A New Developing Space for Chemical Reaction Engineering”, 1st Chinese National Chemical and Biochemical Engineering Annual Meeting, Nov. 5-9, 2004, Nanjing/China
6.   “Syndiotactic Polymerization of Styrene with Homogeneous Metallocene Catalysts”, 2nd International Symposium on Engineering Plastics (EP’2004), Aug. 15-20, 2004, Lanzhou/China
5.   “Preparation and Properties of Styrene-Butadiene Rubber/Clay Nanocomposites”, Asia Polymer Symposium (APOSYM/2004), Oct.10-16, 2004, Hangzhou/China
4.   “Preparation of PP Nanocomposites by In-situ Polymerization: Dispersion of Nanometer Fillers in PP”, 3rd International Workshop on Heterogeneous Ziegler-Natta Catalysts, Oct.29-Nov.1, 2003, Kanazawa/ Japan
3.   “Control of Polymer Morphology on Syndiotactic Polymerization of Styrene with Homogeneous Metallocene Catalyst”, IUPAC World Polymer Congress 2002, July 7-12, Beijing/China
2.       "Kinetics and Particle Morphologies for Syndiotactic Polymerization of Styrene with Homogeneous Metallocene Catalysts", Asia Polymer Symposium, June 2001, Toyohashi/Japan
1.       “Features and Applications of Semicontinuous Emulsion Polymerization”, International Symposium on Advanced Technology of Fine Particles, Oct., 1997, Yokohama /Japan